AT10.1 SCR Float Battery Charger

Products
AT10.1 Microprocessor Charger

AT10.1 Series

Stationary Float Battery Charger

The AT10.1 and AT30, are the industries most trusted and easiest operational single and three phase float battery chargers. Proven reliability and ease of set up and operation have made this series the ‘gold standard’ for all stationary battery charging applications.

Input voltage from 120-600Vac, 50/60Hz
DC Voltages of 12, 24, 48 and 130Vdc
Output current from 6-100A
SCR based rectification technology
Microprocessor / Digital Control
CSA-NRTL/C Certified

Specification

AT10.1 Series Specification Data

AC Input Voltage (Group 1)

120, 208, 220, 240, 380/416, 480, 550-600 @ 60 Hz

AC Input Voltage (Group 2)

120, 208, 220, 2440, 380, 480, 416, 550-600, @ 50-60Hz

Input Tolerance

(+10%) (-12%)

Frequency Tolerance

±5%

Efficiency

85-90% | typical for 130Vdc @ 50-100% load

Voltage Ratings

12, 24, 48,130VDC, nominal

Current Ratings (Group 1)

6, 12, 16, 20, 25

Current Ratings (Group 2)

30, 40, 50, 75, 100

Continuous Rating

110% rated current at maximum equalize voltage at 50ºC

Current Limit Adjustment Range

50% to 110% of rated output

Voltage Regulation

±0.25% for line, load and temp. variations. (*Regulation at max. equalize voltages may not meet ±0.25%)

Ripple (12/24/48Vdc)

Unfiltered on battery 1%Vrms | Filtered on battery 30mVrms | Filtered off battery 1% Vrms | Battery Eliminator 30mVrms

Ripple (130dc)

Unfiltered on battery 2%Vrms | Filtered on battery 100mVrms | Filtered off battery 2% Vrms | Battery Eliminator 100mVrms

Electrical Noise

32dBrnc

Surge Withstand Capability

Meets IEEE-472, ANSI C37.90a

Operating Ambient Temperature

0ºF to 122ºF | (-18ºC to 50ºC) | without derating

Operating Altitude

10,000 feet (3,000 meters) above sea level without derating

Relative Humidity

0% to 95% without condensation

Audible Noise

Less than 65 dBA at any point 5ft (1.5m) from any vertical surface of enclosure

Third Party Approvals

NEMA PE5-1996, PE 5-1997(R2003) | NEMA-1/IP20 type standard enclosure | CSA C22.2

Third Party Approvals (cont.)

NRTL/C - UL 1012/UL 1564 | Seismic qualified | FCC | CE | ABS

Documentation

AT10.1 Description Documents

Document Number

Product Brochure

JF5006-00

AT10.1 Operation Manual Group 1 (6-25Adc)

JA5011-01

AT10.1 Operation Manual Group 2 (30-100Adc)

JA5011-02

AT10.1 Breaker Table

JF5006_RE

Product Specification (PDF)

JF5029-00

Product Specification (DOC)

JF5029-00

AT Series Quick Setup Sheet

JC5020-01

Standard Product Warranty (PDF)

JF5001-00

Standard Product Warranty

JF5001-00

3rd Party Agency Approvals

JF5039-00

AT10.1 Standard Drawings

Document Number

Connection Diagram (6-25A, Group I) Standard – w/o options

JE5033-00

Connection Diagram (6-25A, Group I) w/ common options

JE5033-99

Connection Diagram (30-100A, Group II) w/o options

JE5034-00

Connection Diagram (30-100A, Group II) w/ common options

JE5034-99

Inst Panel / PC Board Details Standard (6-25 amp output)

JE5030-10

Inst Panel / PC Board Details w/auxiliary alarm relay board option - Group 1 (6 - 25 amp output)

JE5030-19

Inst Panel / PC Board Details Standard w/o options - Group 2 (30-100 amp output)

JE5030-20

Inst Panel/PC Board Details w/auxiliary alarm relay board option - Group II (30-100A)

JE5030-29

Internal Component Layout – Style 586/594 w/o options

JE5027-00

Internal Component Layout – Style 586/594 w/ common options

JE5027-99

Internal Component Layout – Style 5017 Encl. w/o options

JE5028-00

Internal Component Layout – Style 5017 Encl. w/ common options

JE5028-99

Internal Component Layout – Style 5018 Encl. w/o options

JE5029-00

Internal Component Layout – Style 5018 Encl. w/ common options

JE5029-99

NEMA 1 Style-586 Enclosure Outline

JE5023-00

NEMA 1 Style-594 Enclosure Outline

JE5024-00

NEMA 1 Style-5017 Enclosure Outline

JE5025-00

NEMA 1 Style-5018 Enclosure Outline

JE5026-00

Mainframe schematic – Group I (6-25Adc) w/o options

JE5031-00

Mainframe schematic – Group I (6-25Adc) w/ common options

JE5031-99

Mainframe Schematic – Group II (30-100Adc) w/o options

JE5032-00

Mainframe Schematic – Group II (30-100Adc) w/ common options

JE5032-99

NEMA 4 (12/13) Style 214 Enclosure Outline

JE5068-00

NEMA 4 (12/13) Style 5036 Enclosure Outline

JE5073-00

NEMA Type 4 (12/13) Style 5037 Enclosure Outline

JE5074-00

NEMA-2 Type Drip Shield, AT Series Group I

JA0092-00

NEMA-2 Type Drip Shield, AT Series Group II (5017 enclosure)

JA0092-01

NEMA-2 Type Drip Shield, AT Series

JA0092-02

Rack Mounting Brackets, AT Series Group I

JA0091-00

Rack Mounting Brackets, AT Series Group II

JA0091-02

Rack Mounting Brackets, AT Series

JA0091-03

Floor Mounting Brackets, AT Series

JA0083-00

Wall Mounting Brackets, AT Series

JA5063-00

AT10.1 Option Documents

Document Number

Communications Module Product Brochure

JF5014-00

AT10.1/AT30 Communications Module Operation Manual

JA0102-04

Communication Module Connection Diagram

JE5107-00

Serial Communications Module (Service Procedure)

JD5008-00

Communications Ethernet Gateway (Service Procedure)

JD5030-00

Communications Module FAQ's

JF5026-00

Forced Load Sharing

JA5054-00

Ground Bus Bar, AT10.1 Group I (6-25A)

JA0096

External Temperature Compensation (Application Note)

JD5003-00

External Temperature Compensation

JA5015-00

Lightning Arrestor (VR3), AT10.1 Group I (6-25A)

JA0094-00

Lightning Arrestor (VR3), AT10.1 Group II (30-100A)

JA0094-01

AT10.1 Series Critical Components Kit Product Brochure

JF5052-01

AT Series Barrier Type Alarm Contacts

EJ5130-XX

Aux. Relay PCB (Style 586/594)

JD5025-00

Aux. Relay PCB (Style 5017/5018)

JD5015-00

Latching Arm Relays

JA5098-00

AT10.1 Group I Heater Assembly

JA0107-00

AT10.1 Group II Heater Assembly (Style-5017)

JA5060-01

AT10.1 Group II Heater Assembly (Style-5018)

JA5060-03

AT Series Battery Discharge Alarm

EJ5136-XX

AT Series End of Discharge Alarm

EJ5137-XX

End of Discharge Connection Diagrams

EJ0143-XX

AT Series AC/DC Circuit Breaker Aux Contacts

EJ5141-3X

Enclosure Padlock Acsy, AT Series Group I

JA0108-00

Enclosure Padlock Acsy, AT Series

JA0108-01

Enclosure Keylock Acsy, AT Series

JD5014-00

Pole Mounting Brackets, AT Series

JA5088-00

Enhanced AT10 EMI Filter

JD5001-00

AT Series Ground Detection Voltmeter

EJ5088-XX

External Vent/Fan Ctrl Assy

JE5120-26

External Vent/Fan Ctrl Assy 20Adc

JE5120-36

Miscellaneous Documents and Procedures

Document Number

Preventative Maintenance Procedure, AT10.1/AT30 Series

JD0064-00

Rectifier Assembly, AT10.1 Group I (6-25A)

JD5009-00

Power Supply Ballast Resistor (R3), AT Series

JD5010-00

Main Control Board (A1) Replacement

JD5012-00

Aux. Relay PCB (Style 586/594)

JD5025-00

Aux. Relay PCB (Style 5017/5018)

JD5015-00

AT Series Filtering (Style 5017/5018/5030)

JD5020-00

AT Battery Eliminator (Style 5017/5018/5030)

JD5023-00

Multi-Tap AC Input Voltage Change (AT10.1 Group II)

JD5026-00

Medium/High AIC Breakers, AT10.1 Group I (6-25A)

JD5027-00

480VAC Input Feature, AT10.1 Group I (6-25A)

JD5029-00

DC Filter Assembly, AT10.1 Group I (6-25A)

JA0085-00

CU-AL I/O Compression Lug, AT10.1 Group I (6-25A)

JA0097

Battery Eliminator Option 1, AT10.1 Series Group I (6-25A)

JA0110-00

Battery Eliminator Option 2, AT10.1 Series Group I (6-25A)

JA0110-01

Polarity / Blocking Diodes (CR1/CR2), AT10.1 Series Group I (6-25A)

JA0115-00

Dual Chargers with battery discharge alarm/meter

JD0052-00

Altitude and Temperature De-rating

JD5006-00

External Relay Free-Wheeling Diode

JD5011-00

Clarifying Ripple Specifications

JD5013-00

Ground Detection in the Real World

JD5032-00

Proper Sizing of Utility Battery Chargers

JF5045-00

CSA Report Max AC Input Current

DC5016-00

Recommended Start-Up Procedure, AT10.1/AT30

JD0064-01

DC Motor Starting

JD5002-00

AT Series Quick Setup Video

Video

Voltage-Sense Vent/Fan Control Assembly

JA5052-10

AT10.1 Series Stationary Float Battery Charger

AT10.1 Series

Stationary Float Battery Charger

Industries Served

Proven Reliability

Market Leader

Assists with NERC compliance

Fully Customizable

5-Year Warranty

AT10.1 Series Specification Data